SERVICE MANUAL NUMBER 28
Driven Gear Bearing Removal
1. Remove bearing from driven gear using universal puller plate. Inspect both the driven
Driven Gear Bearing Installation
1. Apply a light coat of gear lube to inside diameter of new bearing. Place a suitable
90-863160 MAY 2000
gear and the pinion gear for pitting, chipped or broken teeth and excessive or uneven
wear. Replace both gears if any of these conditions exist.
a -
Suitable Mandrel
b -
Universal Puller Plate
c -
Bearing
d -
Driven Gear
mandrel or old bearing race against new bearing race. Place another mandrel on face
of gear and press gear and bearing together.
a -
Hard Wood Or Metal Block
b -
Driven Gear
c -
Tapered Roller Bearing
d -
Mandrel - On Inner Bearing Race
a
b
c
d
d
c
b
a
BRAVO ONE GEAR HOUSING
22108
22108
Page 3B-27