Mercury BRAVO Service Manual page 518

POWER STEERING
11. Using a suitable wrench hold the flat surfaces on the cable guide tube in the vertical posi-
12. Install power steering hoses to power steering assembly.
Page 6A-14
tion. Torque coupler nut to 35 lb-ft (47 Nm). Be certain the flat surfaces are still
aligned vertically after torque is applied to coupler nut.
a - Flat
b - Suitable Wrench
a. Torque both fittings to 23 lb-ft (31 Nm). Route hoses as described in section 2A to
avoid contact with the steering system components.
a
b
SERVICE MANUAL NUMBER 28
73901
90-863160 MAY 2000