Roller Bearing Installation - Mercury BRAVO Service Manual

DRIVE SHAFT HOUSING

Roller Bearing Installation

1. Install driver head onto puller guide. Secure driver head to puller guide with screw. Lubri-
2. Place driver guide on top cover, as shown. Install puller guide assembly through driver
3. Place driver guide into top of drive shaft housing, as shown. Install puller guide assembly
Page 3A-54
cate inside diameter of roller bearing and place roller bearing on driver head, as shown.
a - Driver Head (91-862530)
b - Puller Guide (91-90774)
c - Screw (91-90775)
d - Roller Bearing
guide and install roller bearing by tapping into place until tool bottoms out.
a - Driver Guide (91-90244)
through driver guide and install roller bearing by tapping into place until tool bottoms out.
a - Driver Guide (91-90244)
c
b
SERVICE MANUAL NUMBER 28
a
d
a
a
90-863160 MAY 2000
75967
75968