Integral Mercathode System; Removing Electrode Assembly - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28

Integral MerCathode System

Removing Electrode Assembly

1. Disconnect electrode assembly wires from MerCathode Controller.
2. Remove two screws, flat washers and lock washers.
3. Remove electrode assembly.
90-863160 MAY 2000
a - ORANGE Lead - From Electrode On Transom Assembly
b - RED/PURPLE Lead - Connect To Positive (+) Battery Terminal
c - BLACK Lead - From Engine Harness
d - BROWN Lead - From Electrode On Transom Assembly
e
a - Electrode Assembly
b - Screw (2)
c - Flat Washer (2)
d - Lock Washer (2)
e - Hydraulic Connector Block
a b c d
c
b
d
CORROSION PROTECTION - ALL MODELS
a
22232
70771
Page 7A-9