Mercury BRAVO Service Manual page 258

BRAVO TWO GEAR HOUSING
23. Remove bearing carrier and items shown. Reinstall items shown using NEW load ring.
IMPORTANT: Always use a new load ring when reassembling.
IMPORTANT: Bearing carrier and threads on retainer must be lubricated to prevent
corrosion and cracking in gear housing. Use Quicksilver Special Lubricant 101 on
retainer; coat outside diameter on carrier "rounds" (b) with Perfect Seal.
24. Lubricate bearing carrier seals and fill space between seals with Quicksilver 2-4-C
Page 3C-38
a - O-Ring
b - Thrust Ring
c - Load Ring
marine lubricant with Teflon. Coat carrier mating surfaces with Perfect Seal.
b
b
a - Space Between Seals
b - Carrier Mating Surfaces
a
c
a
SERVICE MANUAL NUMBER 28
a
b
c
b
90-863160 MAY 2000
76884