Seal Removal (Bravo Three); Seal Installation (Bravo Three) - Mercury BRAVO Service Manual

BRAVO THREE GEAR HOUSING
Seal Removal
1. Pry water passage seal out with a suitable tool.
Seal Installation
1. Lightly coat outer diameter of seal with 3-M Adhesive and install in speedometer water
Page 3D-28
a - Water Passage Seal
passage bore. Ensure top edge of seal is flush with gear housing surface.
a - Seal – Flush with Edge of Water Tube Bore
SERVICE MANUAL NUMBER 28
a
a
72450
72449
90-863160 MAY 2000