Removing Forward (A) Gear Ass'y - TOHATSU MD 70-90C2 Service Manual

Lower Unit
Attach new clutch pin snap 3 by using a bladed screw
2.
driver to turn the snap.
Do not reuse removed clutch pin snap.
When attaching clutch pin snap, do not apply
excessive force to the part, or the snap may
expand during operation of the engine, resulting
in damaging gear and/or other parts severely.
3. After assembling, check that clutch can be operated
smoothly, taking care not to allow push rod to drop out.

18) Removing Forward (A) Gear Ass'y

Take out bearing 1 and forward (A) gear 2 by using a
1.
hand put in the gear case.
· Put mid finger into forward (A) gear hole and
take it between the finger and the first finger
(thumb), and lift the thumb side of the gear to
remove it.
· Take forward (A) gear out taking care not to
hit pinion (B) gear.
6-22
CAUTION
3 Clutch Pin Snap
Do not reuse.
3
1
2
TLDI 75/90C2 2010