Assembly Of Pump Case (Lower); Inspection Of Drive Shaft; Inspection Of Pinion (B) Gear And Forward (A) Gear - TOHATSU MFS 4D Service Manual

20) Assembly of Pump Case (Lower)

Apply gear oil to outside of new oil seal 1, and attach it to
1.
pump case (lower) 3 with numbered side down by using a
commercially available mandrel 2.
GEAR
GEAR GEAR
Apply LIT grease to lip of oil seal 1.
2.
LIT
LIT

21) Inspection of Drive Shaft

1. Check drive shaft for bend and wear or twisted splines.
Replace if necessary.
2. Measure drive shaft runout.
Runout Limit (Max) :
0.2 mm (0.008 in)
22) Inspection of Pinion (B) Gear and
Forward (A) Gear
1. Check pinion (B) gear, forward (A) gear, reverse (C) gear
teeth and clutch for crack and wear. Replace if necessary.
4st 4/5/6 2020
LIT
LIT
1
1 Oil Seal
Do not reuse.
a
a Supporting Points
2
3
1
GEAR GEAR
GEAR
a
6
6-19