Disassembly Of Crank Shaft; Inspection Of Crank Shaft - TOHATSU TLDI MD 115A SERIES Service Manual

Power Unit

15) Disassembly of Crank Shaft

Remove "C" ring 1 and pull out spacer 2.
1.
Remove main bearing (lower) 3 by using universal puller
plate and universal puller.
Universal Puller Plate 4 :
3AC-99750-0
Puller 5 :
Commercially Available Item
Protecting Plate 6 :

16) Inspection of Crank Shaft

1. Visually check crank shaft ass'y upper and lower end
bearings for flaws, wear and other damages. Replace
crank shaft ass'y if necessary.
Specified Value a :
#1, Top ø40.0 mm (1.574 in)
#4, Bottom ø40.0 mm (1.574 in)
5-36
3
2
1
4
5
6
a
a
TLDI 115A 2007