Viewing The Attributes Of Existing Host Pools - Motorola RFS Series Reference Manual

5-10 Motorola RF Switch System Reference
5. Use the Automatic Update
off. Select Server update
the DDNS updates from DHCP
6. Select the Enable Multiple User Class
7. Use the DDNS Servers
8. Click OK to save and add the changes to the running configuration and close the dialog.
9. Refer to the
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
10.Click Cancel

5.2.2 Viewing the Attributes of Existing Host Pools

Refer to the Host Pool
for specific MAC addresses. This information can be an asset in determining if a new pool needs to be
created or an existing pool requires modification.
To view the attributes of existing host pools:
1. Select Services
2. Select the Host Pool
3. Refer to the following information to assess whether the existing group of DHCP pools is sufficient:
Pool Name
IP Address
drop-down menu to specify whether the automatic update feature is on or
to enable a DDNS update from the DHCP server. Select
clients.
field to define the IP addresses of the DNS servers.
Status field.
to close the dialog without committing updates to the running configuration
tab within the DHCP Server screen to view how the host pools reserve IP addresses
> DHCP Server from the main menu tree.
tab
Displays the name of the IP pool from which IP addresses can be issued to DHCP
client requests on this interface. The pool is the range of IP addresses for which
addresses can be assigned.
Displays the IP address for the client on this interface using the pool name listed.
checkbox if multiple user class support is needed.
Client update to get