Viewing Access Port Status; Viewing Adopted Access Ports - Motorola RFS7000 Series System Reference Manual

The Transmit Ops value is the maximum duration a device can transmit after obtaining a transmit
opportunity. For Higher-priority traffic categories, this value should be set higher.
6. Enter a value between 0 and 15 for the
The CW Minimum is combined with the CW Maximum to make the Contention Window. From this
range, a random number is selected for the back off mechanism. Lower values are used for higher
priority traffic.
7. Enter a value between 0 and 15 for the
The CW Maximum is combined with the CW Minimum to make the Contention Window. From this
range, a random number is selected for the back off mechanism. Lower values are used for higher
priority traffic.
8. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10. Click Cancel to close the dialog without committing updates to the running configuration.

4.9 Viewing Access Port Status

Use the Access Port Status
adopted and unadopted access ports. The Access Port Status screens is partitioned into two tabs supporting
the following status activities:
•

Viewing Adopted Access Ports

• Viewing Unadopted Access Ports
4.9.1 Viewing Adopted Access Ports
Use the Adopted AP tab for gathering device hardware address and software version information for the
access port. Use this information to determine whether the access port's version supports the optimal feature
set available for the network.
To view existing adopted access port information:
1. Select Network
Contention Window minimum
Contention Window maximum
field for the current state of the requests made from applet. This field displays
screen to view device hardware address and software version information for
> Access Port Status from the main menu tree.
4-117
Network Setup
value.
value.