After All Changes Have Been Made For Mwi And Cpi; Continued - Toshiba VP 300 Installation Instructions Manual

Table 10.2-4
VP 300 Configuration Changes for MWI and CPI (continued)
Item Description
14. Modify System Parameter 116 to be YES.
15. Modify System Parameter 117 to 5.
16. Modify System Parameter 131 to be YES.
17. Modify System Parameter 170 to be YES.
18. Modify System Parameter 191 to be the hour of the day
to reactivate message waiting indicators.
19. Modify the SLOTS Table so that all integrated ports are
in AX mode and that all ports are configured for outcall
except the port used for MWI.
Table 10.2-5
Item Description
1. When you exit the UPDATE after making the necessary
changes, the VP 300 prompts:
FOR CHANGES TO TAKE EFFECT, SYSTEM MUST BE RESTARTED.
2. Restart the system.
Table 10.2-6
Item Description
1. Configure the required test extensions.
2. Perform pre-installation testing.
3. Install the MIC boards in the VP 300 system and connect the cables.
4. Perform Adaptive Integration operational tests.
MITEL SX-100/SX-200 ANALOG ADAPTIVE INTEGRATION

After All Changes Have Been Made for MWI and CPI

Installation and Testing
Command Complete
.M SYS 116
.M SYS 117
.M SYS 131
.M SYS 170
.M SYS 191
.M SLOT
Command Complete
@RESTA
Complete
Toshiba VP Systems Release 6.1 February, 1993
10.2-41