Toshiba VP 300 Installation Instructions Manual page 389

Action
Reload the System
14. Make sure the
configuration backup
diskette is write-enabled.
15. Insert the configuration
backup diskette into the
FD.
16. Press the lower button
on the CPU.
17. Press twice.
Enter
18. Log on to the system
when it comes back up,
using the old
maintenance password.
19. Perform the standard
procedures (i.e., calling
a ring no answer, busy
extensions, etc.) to
verify normal system
operation.
Add System Features
20. Add Name/Greeting
Redundancy and/or
Message Redundancy.
21. To activate redundancy,
refer to the Feature
Description manual —
HARD DISK
REDUNDANCY.
VP 300 Description and Response
To reload the system.
To display the boot process.
Refer to INSTALLATION, Testing, in this manual.
Refer to the Electronic Feature Delivery/Removal section of this
chapter for procedures on how to add system features.
PROCEDURES
Toshiba VP Systems Release 7.1 July, 1994
6-75