Toshiba VP 300 Installation Instructions Manual page 155

Quick Reference Guide
Section Subject
Integration Integration Unit
Integration Unit
Integration Unit
Integration Board
Incoming Call
Records
Message Waiting
Lamps
Command Information
CDINTG x y Takes the integration unit out of service.
x = slot number; y = unit number.
CUINTG x y Brings the integration unit into service.
x = slot number; y = unit number.
ISTAT x y Gives the current status of an integration unit.
x = slot number; y = unit number.
L INT x y Lists the current state of the integration board, the
diagnostic status, and the status of the links, and
the pegs.
x = slot number;
y = unit number.
MON2 Used to monitor incoming call records over the
RS-232C link (port 2). To exit the monitor mode,
press
MWL RELITE Sends commands to relight each MWL that the
VP 300 has marked as ON.
MWL RECALC Examines each mailbox to determine whether its
message waiting lamp should be ON or OFF.
MWOFF x Turns OFF lamp message waiting.
x is the mailbox number. For All, enter A. The
maximum number of digits is eight.
L RT 1 List round trip time for message waiting.
C RT 1 Clears round trip time for message waiting.
Maintenance
Escape .
Toshiba VP Systems Release 7.1 July, 1994