6-82
Installation and Maintenance Manual
Action
16. Choose option 2 —
REMOVE DISK.
17. Remove the Release 5
Software Diskette #1
from the FD.
Reload the System
18. Make sure the
configuration backup
diskette is write-enabled.
19. Insert the configuration
backup diskette into the
FD.
20. Press the lower button
on the CPU.
21. Log on to the system
when it comes back up,
using the old
maintenance password.
22. Perform the standard
procedures (i.e., calling
a ring no answer, busy
extensions, etc.) to
verify normal system
operation.
Toshiba VP Systems Release 7.1
July, 1994
VP 300 Description and Response
After several seconds, the VP 300 displays:
DRIVE IN SLOT B4 HAS BEEN ADDED
To reload the system.
Refer to INSTALLATION, Testing, in this manual.