Toshiba VP 300 Installation Instructions Manual page 535

10.2.8 INSTALLATION CHECKLIST
I
Pre-Installation
Item
1.
2.
Item
1.
2.
3.
4.
5.
6.
MITEL SX-100/SX-200 ANALOG ADAPTIVE INTEGRATION
Table 10.2-2
Mitel SX-100/SX-200 Analog Requirements
Description
The Mitel SX-100/SX-200 Analog must provide a Superset 4 line for
each VP 300 MIC port.
The Mitel SX-100/SX-200 Analog must have two unassigned COS
available, one for CPI and one for MWI.
Table 10.2-3
Mitel SX-100/SX-200 Analog Configuration
Description
Before making any changes, print out the database. Verify and highlight
areas where changes are required.
Configure the MIC Superset extension used for MWI.
Configure the MIC Superset extension used for CPI.
Configure trunks that will be answered by the VP 300.
Configure individual station extensions for Adaptive Integration.
Make sure individual station extensions are forwarded to the VP 300
hunt group for call coverage.
Complete
Complete
Toshiba VP Systems Release 6.1 February, 1993
10.2-39