Toshiba VP 300 Installation Instructions Manual page 170

5-12 Installation and Maintenance Manual
The field, FLAGS, describes the state that the mailbox is currently in. The following are definitions of
the flags that may occur.
Screen Text
LOG-ON
SD-USE
IS-FUL
IN-RNG
HASMSG
MW-CAL
LMP-ON
LP-CAL
FX-DEL
LPRTRY
INTGIP
The mailbox configuration command LIST MAILBOX also displays information about messages
for a specific mailbox. At the @ prompt, enter the following:
L M x M
where x is the mailbox number, and the letter M is a required extension of the command to list a
mailbox message.
The following is an example of this extended command:
@L M 2000 M
STATUS
10 NEW
10 NEW 51AC
FAX STATUS
00
08 FAX
The STATUS, MSG, CRE fields display information about voice and fax messages. To determine if a
message listed in these fields is a fax, refer to the FAX STATUS field of the corresponding column
and row. If a message is a fax, the FAX STATUS is described.
STATUS
MSG
CRE
FAX STATUS
Toshiba VP Systems Release 7.1 July, 1994
Definition
— Mailbox holder is logged on
— Directory is in use by SEND TASK
— Directory is full
— Message waiting is in range
— Mailbox has a message
— Calling to deliver a message
— Message waiting lamp turned ON
— Calling to turn ON/OFF lamp
— Fax delivery
— Retry lamp message waiting command
— Integration lamp command in progress
Distribution lists are not mailboxes and cannot be listed with this command.
Enter
MSG CRE STATUS MSG
50B6 003E 20 SAV 501D
003E 40 LSN 13FA
FAX STATUS
08 FAX
28 FAX PERSNL
The abbreviated term indicates whether a message is new (NEW),
listened to (LSN), saved (SAV), or tagged for future delivery (FUT).
This is a message header number that the Toshiba VP System
associates with a specific message. The message header number is a
locator of where voice or fax data is stored on the hard drive.
This is a hexadecimal user number for the mailbox that created the
message. To find out the mailbox number from the hexadecimal
number, type @L M x where x is the hexadecimal number. The system
displays the mailbox number.
The wording that follows indicates whether a message is a fax, or a fax
marked for delivery to a personal or group fax machine. If the message
is not a fax, the fax status displays 00 only.
CRE STATUS MSG CRE
003E 48 LSN 5008 0002
0000 40 LSN 5007 0000
FAX STATUS
08 FAX
00
STATUS MSG CRE
10 NEW 5187 003E
40 LSN 3002 0000
FAX STATUS
00
18 FAX GROUP