Toshiba VP 300 Installation Instructions Manual page 514

10.2-18 Installation and Maintenance Manual
TRUNK GROUP
Table
Toshiba VP Systems Release 6.1 February, 1993
receive call information from the digit display links, ports answer
calls in AX mode and the caller hears the company greeting.
System Parameter 131 — DEV: SPEAK "DIAL ZERO FOR
ASSISTANCE"
Modify the value of System Parameter 131 to be YES to change the
prompt for a caller transferred to assistance from, "Please hold for
assistance..." to "Dial zero for assistance..."
System Parameter 170 — INTEGRATION LAMP ON/OFF LINK
MUST MATCH
Modify the value of System Parameter 170 to be YES.
System Parameter 191 — HOUR TO REACTIVATE MSG WTG
INDICATORS
Modify System Parameter 191 to be the hour of the day when the VP
System will perform automatic reactivation of message waiting indicators.
Because the PBX automatically cancels message waiting for Superset 4
display telephones after 24 hours, System Parameter 191 is required.
System Parameter 191 reactivates the message waiting indicator every 24
hours.
The TRUNK GROUP Table specifies call processing parameters for
different trunk groups by VP 300 COS.
Configure Trunk Group 0 with a greeting for use with internal forwarded
calls received without extension numbers. The greeting should specify
that the person called does not have a mailbox on the system.
The VP 300 identifies calls from the attendant as coming from Trunk
Group 00, since a call from the attendant cannot be identified by
extension number. Refer to Direct Internal Calls in this section.
Refer to the Configuration manual — TRUNK GROUP Table.