Toshiba VP 300 Installation Instructions Manual page 368

6-54 Installation and Maintenance Manual
Action
Reload the System
30. Press the lower button
on the CPU.
31. Press
twice.
Restore System
Configuration
32. After the VP 300 has
booted from the hard disk,
insert the Release 5
Software Diskette #1 into
the FD.
33. @SUBMIT F:
PREP
34. Remove the Release 5
Software Diskette from
the FD.
Reinstall the System
35. Insert the configuration
backup diskette into the
FD.
Toshiba VP Systems Release 7.1 July, 1994
VP 300 Description and Response
To reload the system.
To log on to the VP 300.
Enter
You may see a message similar to the following message appear ten or
eleven times. It is part of the normal RELOAD procedure.
** UNEXPECTED EOF IN LOADING CONFIG. TABLE (ZEROED REST) :ADELYT
This step prepares the hard disk for a reinstall and preloading of the
database from the configuration backup diskette. The following
Enter
message is displayed once the procedure is complete.
********************************************************************
*
* YOU MUST NOW RE-INSTALL AND PRE-LOAD FROM YOUR
* SYSTEM CONFIGURATION BACKUP DISKETTE. START THIS
* BY INSERTING YOUR SYSTEM CONFIGURATION BACKUP
* DISKETTE INTO THE DRIVE AND AT THE "@" SIGN TYPE: IN
*
********************************************************************
*
*
*
*
*
*