Toshiba VP 300 Installation Instructions Manual page 171

I Message Status
The list header command LIST HEADER displays information about a message. At the @ prompt,
enter:
L HE x
Enter
where x is the message number (MSG), listed when L M x M is entered.
The following example shows all items that can be displayed.
@L HE 1
CREATOR MAILBOX NUMBER: 401
EXTENSION MESSAGE NUMBER: 0000
TIME 09/26/90 16:56
USE COUNT: 00001
ORIGINAL MESSAGE TYPE: 4
DEPTH OF FORWARDING: 0
MSG TRANSMISSION TYPE: 1
CODE RATE: 24 KBS
VOICE BLOCKS:
VOICE BLOCK SIZE:
FLAGS: PRUTE
ADDRESSES:
For the field, ORIGINAL MESSAGE TYPES, the following lists the descriptions possible:
Number Description
1 Made by message command
2 Forwarded message
3 Reply message
4 Greeting message
5 Name message
6 Broadcast message
7 Message left after call to busy extension
8 Message after no answer/vacant/Centrex
9 Quick message
10 Message left after greeting played or no extension defined
11 Message came from network
12 This is a Return Receipt message
13 The message has been forwarded on the network
14 The mailbox is full
15 The mailbox does not exist
16 The disk was full
17 Routes failed too many times
18 The message was undeliverable
19 Too many addresses for this location
20 Generic mailbox failure (VP networking)
21 Not used
22 Auto-Forward of a Broadcast message
23 Personal Distribution List name message
24 Send failure due to mailbox being full
25 Record AP processor
26 Sent by AP processor
27 Network clone message
PRIMARY SECONDARY
00002 00000
8KBYTES 8KBYTES
MAINTENANCE
Toshiba VP Systems Release 7.1 July, 1994
5-13