10.1-10
Installation and Maintenance Manual
I
Toshiba VP Systems
Release 7.1
July, 1994
Trunk Identification
Trunk identification differs among the various Mitel SX-200 Digital software releases.
These differences have been outlined below for Generics 1000, 1001, 1002 and 1003.
•
Generic 1000
An incoming trunk is identified only by individual trunk number,
not by trunk group. This requires that each trunk that is to be
identified by the VP 300 have its own entry in the VP 300's
TRUNK GROUP Table.
•
Generic 1001 or
An incoming trunk is identified by individual trunk number,
Generic 1002
if the trunk is not part of a trunk group, or by trunk group
number, if the trunk is part of a trunk group.
•
Individual trunks can be programmed with a name, but this name
appears in a Superset 4 display only while the trunk first rings in
to the PBX. This requires that each trunk group that is to be
identified by the VP 300 be configured either with no
programmed name or with a name that begins with the string
TXXX, where XXX is the individual trunk number. The trunk
number is the number entered in the VP 300 TRUNK GROUP
Table. The programmed name can be no more than eight
characters long.
•
Generic 1003
An incoming trunk is identified by individual trunk number,
(Prior to D96.7)
if the trunk is not part of a trunk group, or by trunk group
number, if the trunk is part of a trunk group.
•
Each trunk group that is to be identified by the VP 300 must be
configured with either no name or with a name that includes the
string TXXX. XXX is the trunk group number or some other
number that permits the VP 300 to identify the trunk group via
the VP 300 TRUNK GROUP Table. Programmable trunk names
have a maximum length of eight characters.
•
Individual trunks can be programmed with a name, but this name
appears in a Superset 4 display only while the trunk first rings in
to the PBX. This requires that each trunk group that is to be
identified by the VP 300 be configured either with no
programmed name or with a name that begins with the string
TXXX, where XXX is the individual trunk number. The trunk
number is the number entered in the VP 300 TRUNK GROUP
Table. The programmed name can be no more than eight
characters long.
•
Generic 1003
The PBX class of service option COV Voice Mail Port forces
(D96.7 or later)
the Superset 4 display to show only the trunk number of a direct
external call, regardless of any trunk names or trunk group
names. This removes the limitations described above for earlier
version of Generic 1003.