Toshiba VP 300 Installation Instructions Manual page 533

MITEL SX-100/SX-200 ANALOG ADAPTIVE INTEGRATION
PEG NAME
1 REPLY ERROR
2 REQUEST ERROR
LINK-DEPENDENT PEGS
The following link-dependent pegs are listed by the LIST
INTEGRATION command. Each link has its own pegs.
PEG NAME
1 DEAD ERROR
2 INIT PROC ERROR
3 VCU CTRL ERROR
4 GLARE COUNT
5 MSG WT ERROR
6 SOURCE ERROR
7 DEST ERROR
8 RE-RING ERROR
9 MSG WT NOT
CONFIGURED
10 RESEND ERROR
DESCRIPTION
Number of times the MIC timed out
waiting for the VP 300 to process a
reply.
Number of times the MIC firmware
received an invalid request.
DESCRIPTION
Number of times the MIC firmware
reported the link to be dead.
Number of times the MIC link had to
retry part of its initialization procedure.
Number of times the MIC link's call
processing routine saw an unexpected
VCU control event.
Number of times that the VP 300 went
off-hook on this port to make an outcall
and the MIC firmware saw a call come
in at the same time.
Number of times the MIC detected an
error while trying to control a message
waiting indicator (this does not include
Message Waiting Not Configured or
Message Waiting Not Able to Make).
Number of times the MIC firmware
could not identify the source of a call.
Number of times the MIC firmware
could not identify the destination of a
forwarded call.
Number of times the firmware saw a
call ring in immediately after another
call was ringing in without the line
indicator showing an idle line.
Number of times the MIC made a call
to toggle a message waiting indicator
and could not identify the status of the
indicator.
Number of times the firmware saw no
response to a keypress after a timeout
and had to resend the keypress.
Toshiba VP Systems Release 6.1
10.2-37
February, 1993