Toshiba VP 300 Installation Instructions Manual page 403

I Adding Language Prompts for Release 6.1 and Later
Language prompts are added using the Restore procedure. The following are the steps to add a language to
the Toshiba VP system.
Before adding a second set of language prompts, verify that the Disk Option procedure to Upgrade
Languages has been performed. Disk space must be reallocated before additional languages are
added.
To restore a language, refer to the Restoring Language Prompts section in this chapter.
Action
1. @ FLOPPY
Enter
2. :2
Enter
3. :5
Enter
VP 300 Description and Response
The following menu is displayed:
1. BACKUP
2. RESTORE
3. FLOPPY DIRECTORY
SELECT FLOPPY OPTION (1-3, EMPTY LINE = EXIT).
:
The following menu is displayed:
------------------- RESTORE ------------------
1. NAMES
2. GREETINGS.
3. SCRIPT AND SEQUENTIAL MESSAGES.
4. PERSONAL-DISTRIBUTION-LIST NAMES.
5. PROMPTS.
6. ALL NAMES, GREETINGS, SCRIPT AND SEQUENTIAL MESSAGES,
PERSONAL-DISTRIBUTION-LIST NAMES.
SELECT RESTORE OPTION (1-6, EMPTY LINE = DONE).
:
The following menu is displayed:
------------------- RESTORE PROMPTS ------------------
1. RESTORE A LANGUAGE
2. ADD A LANGUAGE
3. RESTORE A PROMPT
SELECT RESTORE OPTION (1-3, EMPTY LINE = DONE).
:
PROCEDURES
Toshiba VP Systems Release 7.1 July, 1994
6-89