Continued - Toshiba VP 300 Installation Instructions Manual

Quick Reference Guide
Section Subject
Diagnostics LIC

(continued)

LIC
Network Routes
System Status
Fax Application
Processor
Hardware
Data Fields
Errors
List Hardware
Error
Clear Hardware
Error Table
Toshiba VP Systems Release 7.1 July, 1994
Command Information
TE L 4 x Test to see whether loop current is present on
a specific port. x = port number.
TE L 5 x Tone reflection test on one port.
x = port number.
TE NET x y Tests network routes to a network location.
x = network location code (optional);
y = non-zero show digits dialed.
TE S Checks voltages and temperatures.
TE X x y z Fax loopback test. Tests that the fax modems on
the Fax Application Processor can send and
receive fax data and that the TDM bus connection
is correct. (Release 7.1 or later)
x = slot number
y and z = fax channels
BITTST x Converts hardware error data fields into bit sets.
x = hexadecimal number.
L H Lists the Hardware Error Table
C H Clears the Hardware Error Table
Maintenance