Toshiba VP 300 Installation Instructions Manual page 367

Action
26. Check to make sure that
the revision level of the
prompt diskettes is the
correct revision level for
the VP 300 software
release being restored.
27. Insert the Release 5
Software Diskette #1
into the FD.
28. @FLOP
Enter
29. Remove diskette #4
from the FD.
VP 300 Description and Response
The following is displayed:
@FLOP
1. BACKUP.
2. RESTORE.
3. FLOPPY DIRECTORY.
SELECT FLOPPY OPTION (1–3, EMPTY LINE = EXIT).
:2
– – – – – – – RESTORE – – – – – – –
1. NAMES.
2. GREETINGS.
3. SCRIPT AND SEQUENTIAL MESSAGES.
4. PERSONAL-DISTRIBUTION-LIST NAMES.
5. PROMPTS
6. ALL NAMES, GREETINGS, SCRIPT AND SEQUENTIAL MESSAGES,
PERSONAL-DISTRIBUTION-LIST NAMES.
SELECT RESTORE OPTION (1– 6, EMPTY LINE = DONE).
:5
PROMPTS
ENTER THE PROMPT NUMBER TO RESTORE
(1 – 3 DIGITS, ALL, EMPTY LINE = DONE).
:ALL
INSERT FLOPPY , PRESS RETURN WHEN READY. . .
TITLE: ALL PROMPTS
RESTORING PROMPT 1
RESTORING PROMPT 2
.
.
.
RESTORING PROMPT 510
RESTORING PROMPT 511
- - - - - - - - - - RESTORE COMPLETE - - - - - - - - - -
PROCEDURES
. . . DONE
. . . DONE
. . . DONE
. . . DONE
Toshiba VP Systems Release 7.1 July, 1994
6-53