Continued - Toshiba VP 300 Installation Instructions Manual

5-74 Installation and Maintenance Manual
Error Type:Name
46: Received DTMF
other than D
(AMIS)
DATA-1 = ERROR CODE:
01 = WHILE TRYING TO ESTABLISH A CONNECTION WITH A LOCN,
WE GOT BACK DTMF WE WERE NOT EXPECTING, SUGGESTING
WE MAY HAVE, SOMEHOW, DIALED A PERSON'S TELEPHONE
NUMBER.
FOR PROTOCOL 1, 2 AND 3 WE COULD'VE GOT DTMF 0-9, * OR #
FOR PROTOCOL 4 WE COULD'VE GOT ANY DTMF OTHER THAN D
DATA-2 and DATA-3 = ARE THE INDEX INTO THE NETRLT TABLE
THAT LEADS US TO THE PROBLEMATIC LOCATION
REMEDY:
DATA-2 = ERROR CODE:
02 = ATTEMPTING TO NETWORK WITH AN OEM MODEL THAT HAS
NETWORKING INCOMPATIBILITY
DATA-2 and DATA-3 = ARE THE INDEX INTO THE NETRLT TABLE
THAT LEADS US TO THE PROBLEMATIC LOCATION
REMEDY:
61: VCU: Insufficient
Control RAM
DATA-1 = MEGABYTES OF RAM ACTUALLY HAVE
DATA-2 = MAX PORTS GIVEN BY CPU REQUEST
62: VCU: Insufficient
Voice RAM
DATA-1 = MEGABYTES OF RAM ACTUALLY HAVE
DATA-2 = MAX PORTS GIVEN BY CPU REQUEST
Toshiba VP Systems Release 7.1 July, 1994
Table 5-3 Hardware Error Types and Remedies (continued)
Source
While trying to establish
a connection with a
Protocol 4 (AMIS)
location, received non
D DTMF tone,
suggesting that a person's
telephone number may
have been dialed.
Check the route, PNN and TNN. Contact the system
administrator at the remote end.
Contact your Toshiba Technical Support center.
The VCU does not have
enough control RAM
for model specified
by CPU.
The VCU does not have
enough voice RAM
for model specified
by CPU.
Remedy
Check the route. Check that the PNN or
TNN is correct. Contact the system
administrator of the remote network.
Contact Toshiba Technical Support.
Contact Toshiba Technical Support.
Priority
1
3
3