Toshiba VP 300 Installation Instructions Manual page 399

Action
12. Repeat the DISKO
command and again choose
option 2 — REMOVE
DISK.
14. Remove Software Diskette
#1 from the FD.
Reload the System
14. Make sure the
configuration backup
diskette is write-enabled.
15. Insert the configuration
backup diskette into the
FD.
16. Press the lower button
on the CPU.
17. Log on to the system
using the old
maintenance password.
18. Verify correct system
operation.
VP 300 Description and Response
@DISKO
CURRENT STATUS
Slot Type ID Status
B3 System1 S1
B4 System2 S2
C1 Voice1 V1
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
Select option to be performed
(1-5 — Empty line = EXIT)
:2
Drive in slot C1 has been removed.
To reload the system.
Refer to INSTALLATION, Testing, in this manual.
PROCEDURES
Configured
ACTIVE Configured
ACTIVE Configured
ACTIVE Configured
Toshiba VP Systems Release 7.1 July, 1994
6-85