Electronic Feature Delivery/Removal - Toshiba VP 300 Installation Instructions Manual

6.1

ELECTRONIC FEATURE DELIVERY/REMOVAL

The Option Control Chip (OCC), located on the Motherboard in Shelf A, contains the features the VP 300
is equipped with. The following optional features can be added or removed from VP 300 systems.
Software Option
SW-30001
SW-30004
SW-30007
SW-30008
SW-30009
SW-30015
SW-30019
SW-30020
SW-30021
SW-30022
SW-30023
SW-30031
SW-30034
SW-30041
SW-30046
Contact Toshiba's Customer Service department to add or remove optional software.
The OCC must always remain with the system it was purchased for. You cannot enter the
UPDATE program if the OCC is not installed on the Shelf A Motherboard. If the Shelf A
Motherboard must be replaced, the OCC assembly must be removed from the original board and
installed on the replacement board.
Description
IntraMessaging
Networking
VP Fax Mail (Release 7.1 or later)
Name and Greeting Redundancy
Message Redundancy
AMIS Analog Networking
Single Digit Menus
Incoming Call Restriction
FIFO Queuing
Scripted Prompting
Names Directory
Adaptive Integration
Automatic Network Names Confirmation
Multi-lingual Prompts
Upgrade VP 300 to 96 ports (VP 300XL)
Toshiba VP Systems Release 7.1
6-1
PROCEDURES
July, 1994