Table of Contents
Advertisement
TEST C 2 (or TE C 2)
This causes the initialization string and cancel forward string to be attempted for each port in turn. To
test a specific port or range of ports, at the @ prompt, enter:
TE C 2 [X] [Y]
Enter
where X is the port number or the first port in a range of ports initialized, and Y is the last port in a
range of ports. If only one port is specified, the VP 300 tries to initialize and cancel forwarding for
only the port specified. If a range is specified, the VP 300 tries to initialize and cancel forwarding for
all ports in the range. If no port is specified, the VP 300 tries to initialize and cancel forwarding for all
ports. If a port successfully initializes and cancels forwarding, it goes to the IDL state. If a port fails to
complete either the initialization string or the cancel forwarding string, the status remains NDT.
I System Status
This command checks the system status for DC voltages and temperature. At the @ prompt, enter:
TEST STATUS (or TE S)
If DC voltages and temperature are within acceptable ranges, the VP 300 responds with:
SYSTEM STATUS TESTED OK.
If DC voltages and temperature are out of range, the VP 300 responds with:
ERROR DETECTED. SEE HARDWARE ERROR TABLE.
I List Features
This command lists the optional features installed and information about the size of the system. The
information given is as follows.
@L F
----------------------- SYSTEM SOFTWARE RELEASE L.X.X.X (MM/DD/YY) -----------------------
DAY
MM/DD
HH:MM:SS
MODEL NAME: VP 300
FEATURE PACKAGES:
SW-40001 SW-40004 SW-40008 SW-40009 SW-40019
SW-40020 SW-40021 SW-40022 SW-40023 SW-40024
SW-40026 SW-40027 SW-40031 SW-40032
MAXIMUM NUMBER OF PORTS: 32
MAXIMUM NUMBER OF DRIVES: 03
MAXIMUM NUMBER OF SCHEDULE TABLE ENTRIES: 08
MAXIMUM NUMBER OF MAILBOXES: 05000
NUMBER OF LANGUAGES: 01
PURCHASED HOURS ON OCC: 0000
PURCHASED HOURS ON DISK: 00025
Enter
Enter
YYYY (SYSTEM NAME)
MAINTENANCE
ID:XXX
S/N:123456
PBX:XX
Toshiba VP Systems Release 7.1
5-25
July, 1994
Advertisement
Chapters
Table of Contents
