Toshiba VP 300 Installation Instructions Manual page 517

3:08
Program
1 2
4 5
7 8
0
*
Figure 10.2-1 Diagram of the Superset 4 Telephone
C. Go off-hook on the Superset 4 by picking up the handset and check for dial tone. If dial
tone is present, verify that the display is blank, the HANG UP prompt appears over
softkey 6, and the LCD line indicator next to the prime line key is on solid.
➧
NO Determine the cause and correct the problem before continuing.
D. Replace the handset. Does the line indicator turn OFF and do the time and date return
to the display?
➧
NO Determine the cause and correct the problem before continuing.
E. Check the display for the FWD prompt, located near the left edge of the Superset 4
display. If the prompt is not ON, proceed with step F. If the prompt is ON, the
MITEL SX-100/SX-200 ANALOG ADAPTIVE INTEGRATION
hold
9-JAN-92
MSG
display
3
select features
6
speaker on/off
9
mic. on/off
#
Toshiba VP Systems
10.2-21
Volume
controls for
speaker and
ringer
Prime
Line key
Softkeys
(numbered
1 to 6, starting
from the left)
Release 6.1 February, 1993