Continued - Toshiba VP 300 Installation Instructions Manual

Quick Reference Guide
Section Subject
Integration Integration Cards

(continued)

Traffic Pegs Integration Board
Traffic Peg Count
Table
Miscellaneous
Message Purge
Baud Rate
Message Purge
Back up and
Restore
Toshiba VP Systems Release 7.1 July, 1994
Command Information
UPINTG Restarts the integration cards and therefore
disrupts call processing for approximately one
to two minutes.
C I x y Clears the integration board pegs.
x = slot number; y = unit number.
L P Lists the pegs.
C P Clears the pegs.
APURGE x y z Starts the message purge function if Automatic
Message Purge is not already in progress. Displays
the thresholds specified and asks for confirmation
before initiating the message purge function.
x = save threshold, y = new threshold,
z = Net Name.
BAUD Displays the current baud rate setting. The
available baud rates are 300, 600, 1200, 2400,
4800, 9600, and 19200.
CPURGE Cancels message purge if it is in progress,
regardless of whether it was initiated automatically
or by the APURGE command. Asks for
confirmation before cancelling message purge.
FLOPPY Used to back up and restore greetings, names,
scripted and sequential messages, and personal
distribution list names. Also used to load system
prompts.
Maintenance