Continued - Toshiba VP 300 Installation Instructions Manual

Quick Reference Guide
Environmental Requirements (continued)
Vibration
Installation
Environment
Flooring
Cabinet Clearance
Heat Dissipation
Interfaces
Telephone Ports
Port Connector
System Serial Port
RS-232C Integration
Port
Internal Modem
Alarm Relay
Certifications
Toshiba VP 300 System Specifications
Operational (22–500 Hz):
Equipment room or office
No special requirements
Front:
Rear:
Sides:
Top:
Maximum 1,000 Watts (3412 BTU per hour) per cabinet, each cooled
with four internal 4-inch (10.2-cm) fans
2-wire, 2500-type; 2-wire, DID-type, optional (DAC)
50-pin telco, 4 ports per connector with 4-port LIC, 8 ports per
connector with 8-port LIC, rear access
16 ports per connector for DID-type from DAC panel
RS-232C, auto-baud rate select, DB25, 300–19,200 bps
RS-232C, 1200 bps, DB25
300/1200 bps; Bell 103/212A, one per cabinet, accessible from any
telephone port
DB9, rear access
FCC Part 15, Class A
FCC Part 68, 4-port LIC Registration:
Ringer Equivalence Number:
VDE B
UL1459
Designed to meet CSA, DOC, TUV, JATE, and BABT regulations
0.1 g
22 inches (55.9 cm)
6 inches (15.2 cm)
1 inch
None
EQ9USA-18290-VM-T
0.7A
Toshiba VP Systems Release 7.1 July, 1994
Hardware