Toshiba VP 300 Installation Instructions Manual page 511

10.2.5 VP 300 CONFIGURATION
This section describes the changes that must be made to the VP 300 configuration for Adaptive
Integration for both Message Waiting Indication and Called Party Identification. These changes are
made by using the UPDATE program.
External Call
Configuration
Internal Call
Configuration
To configure the VP 300 with Adaptive Integration on a Mitel SX-100/SX-200 Analog, make the
following configuration changes using the UPDATE program.
Mailbox and extension numbers must match for Message Waiting Indication
to operate correctly.
Mailbox COS
MITEL SX-100/SX-200 ANALOG ADAPTIVE INTEGRATION
The Mitel PBX provides the VP 300 with the trunk number of an
external call. The TRUNK GROUP Table enables the VP 300 to process
the call according to which trunk group the call came in on instead of
which port the VP 300 answered the call on. This means integrated ports
do not need to be split. Examples of how this can be applied include:
•
A different company greeting may be recorded for each trunk group.
•
External callers can have a different intercept position than internal
callers.
•
Different intercept position can be defined for each trunk group.
Since the SX-100 and SX-200 Analog identify incoming calls by
individual trunk number, individual trunk numbers, not trunk group
numbers, are used for VP 300 TRUNK GROUP Table entries.
Refer to the Configuration manual — TRUNK GROUP Table.
Message Waiting Indication provides message waiting indication from
the VP 300 for phones equipped with message waiting indicators. Assign
VP 300 COS Attribute 9 to extensions having these indicators. Do not
assign COS Attribute 9 to extensions that do not have message waiting
indicators.
Called Party Identification provides several mailbox convenience features
for direct internal callers, as described in Called Party Identification Call
Processing, in this section. Every VP 300 mailbox may use all of these
features except the Personal Greeting Access feature, which is assigned
by COS through INFORMATION Table Index 25. Index 25 must be
defined as YES to permit selected people to access their personal
greetings without entering their mailbox. This access is possible only
when a person is calling the VP 300 directly from the extension associated
with their mailbox.
W A R N I N G
COS Attribute 9 — LAMP OR DISPLAY PHONE MESSAGE
WAITING (Message Waiting Indication only)
Toshiba VP Systems Release 6.1 February, 1993
10.2-15