Key Indicator Lamp Check; Dtc Check - Suzuki GRAND VITARA Owner's Manual

Grand vitara
Hide thumbs Also See for GRAND VITARA:
Table of Contents

Advertisement

Key Indicator Lamp Check

Push the ignition knob switch (2) of the steering lock unit
(1) and check that the key indicator lamp (3) in the
combination meter lights up in red or blue. If it does not
light, go to "Key Indicator Lamp Circuit Check (Key
indicator lamp doesn't light when ignition knob switch is
pushed.): ".
1
S5JB0AA504006
3
2
I5JB0AA50006-01
Keyless Start System:

DTC Check

1) Check to make sure that all doors are closed.
2) Open driver side door window glass and door.
3) Check to make sure that ignition key is not inserted
in ignition key cylinder. If it is, remove it.
4) Perform "Key Indicator Lamp Check: ".
5) Close driver side door and within 15 seconds after
that, perform Steps a) through e) described below.
a) Insert ignition key (1) in ignition key cylinder (2).
b) Remove ignition key from ignition key cylinder.
c) Repeat Steps a) and b) twice.
d) Insert ignition key in ignition key cylinder.
e) Push driver side door request switch (3) 4 times.
At the end of Step e), buzzer sounds twice to
inform that trouble diagnosis mode has started.
10E-10
S5JB0AA504007
1
2
3
I5JB0AA50007-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents