Alarm Function; Can Communication Of Keyless Start System - Suzuki GRAND VITARA Owner's Manual

Alarm Function

Under conditions as described in the table below, the keyless start control module makes the key indicator lamp flash
in red and the buzzer sound to call the driver's attention.
Ignition knob switch has stopped between ACC and OFF
positions while driver side door is opened (ignition knob
switch un-returned alarm)
Ignition switch has stopped between ACC and OFF
positions while driver side door is closed (ignition knob
switch un-returned alarm)
Remote controller is carried out of vehicle and doors are
closed while ignition switch is at ON position (remote
controller carried-out alarm)
Remote controller is carried out of vehicle through a window
without opening door while ignition switch is at ON position
(engine is running) and vehicle has been driven at 10km/h
(6 MPH) or more speed without remote controller in vehicle
compartment (the first time 10 km/h (66 MPH) speed is
exceeded only) (Remote controller carried-out alarm)

CAN Communication of Keyless Start System

Keyless start control module communicates with each control module (ECM, BCM and combination meter) about the
following information. For details of CAN communication, refer to "CAN Communication System Description: in
Section 1A".
• Data which keyless start control module receives from ECM
– Vehicle speed signal
– ECM-keyless start control module code
• Data which keyless start control module transmits to ECM
– ID code of keyless start control module
– ECM-keyless start control module code
• Data which keyless start control module receives from BCM
– Door switch status
– Door lock status
• Data which keyless start control module transmits to BCM
– Ignition knob switch signal
– Door lock/unlock request signal
– Buzzer for keyless start system request signal
– Answer back request signal
• Data which keyless start control module transmits to combination meter
– Key indicator lamp control signal
Condition
Keyless Start System:
Buzzer operation Key indicator lamp operation
Intermittent
2 times
3 times
3 times
10E-6
S5JB0AA501006
—
Flashing in red
Flashing in red
Flashing in red
S5JB0AA501007