10E-33 Keyless Start System:
Front Door (Driver and Passenger Side) Rear
End Door Request Switch Inspection
1) Remove door trim from door panel.
For front door trim, refer to Step 1) to 3) of "Front
Door Glass Removal and Installation: in Section
9E".
For rear end door trim, refer to Step 1) of "Rear End
Door Lock Assembly Removal and Installation: in
Section 9F".
2) Check for continuity between terminals "1" and "2" at
each switch position as shown below. If check result
is not as specified, replace.
Request switch (1) specification
ON position (request switch pushed): Continuity
OFF position (request switch released): No
continuity
2. Outside handle
S5JB0AA506002
1
2
"2"
"1"
I5JB0AA50020-01
Steering Lock Unit Removal and Installation
For removal and installation, refer to "Steering Lock
Assembly (Ignition Switch) Removal and Installation: in
Section 6B".
Steering Lock Unit Inspection
Check key reminder switch and ignition knob switch in
steering lock unit for operation referring to "Ignition
Switch Inspection: in Section 9C".
Front Door Lock Switch Inspection
1) Remove door trim from door panel referring to Step
1) to 3) of "Front Door Glass Removal and
Installation: in Section 9E".
2) Check for continuity between terminals "1" and "2" at
each switch position as shown below. If check result
is not as specified, replace.
Door lock switch specification
LOCK position: No continuity
UNLOCK position: Continuity
"1"
"2"
[A]: Lock
[C]: Right side door lock switch
[B]: Unlock
[D]: Left side door lock switch
S5JB0AA506003
S5JB0AA506004
S5JB0AA506005
[B]
[A]
I5JB0AA50021-02