Content - Polycom RMX 1500 Administrator's Manual

Modifying the Threshold Line Rate for HD Resolution Content
6
In the Content Video Definition section, select the Content Settings and
Protocol as follows:
Table 2-9 H.239 Content Options
Field

Content

Settings
Content
Protocol
7 Click OK.
The threshold line rate for HD Resolution Content is the line rate at which
the RMX will send Content at HD1080 Resolution. The default is 768 kbps.
To modify the HD Resolution Content threshold line rate:
1
On the RMX menu, click Setup > System Configuration.
Chapter 2-Additional Conferencing Information
Description
Select the transmission mode for the Content channel:
•
Graphics — basic mode, intended for normal
graphics
•
Hi-res Graphics — a higher bit rate intended for
high resolution graphic display
•
Live Video — Content channel displays live video
Selection of a higher bit rate for the Content results in a
lower bit rate for the people channel.
H.263 – Content is shared using H.263 even if some
endpoints have H.264 capability.
Up to H.264 – H.264 is the default Content sharing
algorithm.
When selected:
•
Content is shared using H.264 if all endpoints have
H.264 capability.
• Content is shared using H.263 if all endpoints do not
have H.264 capability.
•
Endpoints that do not have at least H.263 capability
can connect to the conference but cannot share
Content.
2-35