Polycom RMX 1500 Administrator's Manual page 803

Viewing Hardware RMX 4000 Component's
Properties
LAN 0, LAN 1, LAN 2 Properties:
The RMX unit's chassis contains 3 external LAN connectors which
register the following information listed below. The information will
be refreshed every 8 seconds and also contains a peek detector to log
the maximal values, since the last peek values reset.
2
Click Close to return to the HW Monitor pane.
The properties displayed for the hardware components will vary
according to the type of component viewed. These component properties
can be grouped as follows:
• MCU Properties (RMX 4000)
• Card Properties (MPM+/MPMx, CNTL 4000, RTM-IP 4000, RTM
ISDN, RTM LAN)
Chapter 20-RMX Hardware Monitoring
20-21