Polycom RMX 1500 Administrator's Manual page 186

Polycom RMX 1500/2000/4000 Getting Started Guide
3-22
3
Define the following parameters:
Table 5 New Participant – Dial-out Cascade Link
Field
Display Name
Dialing Direction
Type
IP Address
Alias Name
Alias Type
Description
Enter the participant name
Select Dial-out.
Select H.323.
Enter the IP address of the Signaling Host of the
MCU running the other (second) conference, where
the cascade enabled Entry Queue is defined.
If you are using the target MCU IP address, enter the
Conference ID of the target conference. For
example: 24006
If a gatekeeper is used, instead of the IP address,
you can enter the prefix of the target MCU as
registered with the gatekeeper, as part of the dialing
string and the conference ID in the format:
<Target MCU Prefix><Conference_ID>
For example: 92524006
If the conference has a password and you want to
include the password in the dial string, append the
password to in the dial string after the Conference
ID.
For example: 92524006##1234
If the conference has a password and you do not
want to include the password in the dial string, set
the ENABLE_CASCADED_LINK_TO_JOIN_
WITHOUT_PASSWORD flag to YES.
For more information see the RMX1500/2000/4000
Administrator's Guide, "Modifying System Flags" on
page 11-5.
Select E.164 (digits 0-9, *, #).