Polycom RMX 1500 Administrator's Manual page 307

Table 8-2 New Profile - Advanced Parameters (Continued)
Field/Option
Auto Terminate
Echo
Suppression
Keyboard Noise
Suppression
6
Click the Video Quality tab.
Chapter 8-Operator Assistance & Participant Move
Description
When selected (default), the conference automatically
ends when the termination conditions are met:
Before First Joins — No participant has connected to
a conference during the n minutes after it started.
Default idle time is 10 minutes.
At the End - After Last Quits — All the participants
have disconnected from the conference and the
conference is idle (empty) for the predefined time
period. Default idle time is 1 minute.
At the End - When Last Participant Remains —
Only one participant is still connected to the
conference for the predefined time period (excluding
the recording link which is not considered a participant
when this option is selected). This option should be
selected when defining a Profile that will be used for
Gateway Calls and you want to ensure that the call is
automatically terminated when only one participant is
connected. Default idle time is 1 minute.
Note: The selection of this option is automatically
cleared and disabled when the Operator Conference
option is selected. The Operator conference cannot
automatically end unless it is terminated by the RMX
User.
When enabled (default), an algorithm is used to search
for and detect echo outside the normal range of human
speech (such as echo) and automatically mute them
when detected.
Clear this option to disable the Echo Suppression
algorithm.
Note: This option is activated only in MPM+ and
MPMx Card Configuration Mode.
When enabled, an algorithm is used to search for and
detect keyboard noises and automatically mute them
when detected.
Note: This option is activated only in MPM+ and
MPMx Card Configuration Mode.
8-13