Modifying System Flags - Polycom RMX 1500 Administrator's Manual

System Configuration

Modifying System Flags

2
To resolve participant issues that created the Participant Alerts, the
administrator can either Connect
participant.
The system's overall behavior can be configured by modifying the default
values of the System Flags.
For flag changes to take effect, the MCU must be reset. For more information,
see Chapter 19, "Resetting the RMX" on page 19-127.
To modify system flags:
1
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
Chapter 19-RMX Administration and Utilities
, Disconnect or Delete a
19-5