Gathering Phase Duration - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Getting Started Guide
2-52
• Content can be sent during the Gathering Phase. The content is
displayed in the large video window of the participant's layout while
the Gathering slide is displayed in a smaller video window in the
layout.
Content

Gathering Phase Duration

The duration of the Gathering Phase can be customized by the
administrator so that it is long enough to be viewed by most connected
participants yet short enough so as not to over extend into the scheduled
conferencing time.
The Gathering Phase duration is configured for the RMX, by the following
System Flags in system.cfg using the Setup >System Configuration menu:
• CONF_GATHERING_DURATION_SECONDS
Range: 0 - 3600 seconds
Default: 180 seconds
The Gathering Phase duration of the conference is measured from the
scheduled start time of the conference.
Example: If the value of the flag is set to 180, the Gathering slide is
displayed for three minutes to all participants starting at the
conference Start Time, and ending three minutes after the conference
Start Time.
For participants who connect before Start Time, the Gathering slide is
displayed from the time of connection until the end of the Gathering
duration period.
Gathering Slide