Polycom RMX 1500 Administrator's Manual page 707

2 View or modify the following fields:
Table 19-9 RMX Time – Fields Properties
Field
GMT Date
Local Time
GMT Time
GMT Offset
Get Client Time
Use NTP Server
Adjust
Reservations Time
(Button)
After resetting the MCU a delay may occur when synchronizing with the external
NTP server.
Chapter 19-RMX Administration and Utilities
Description
The date at Greenwich, UK.
The RMX's local time settings, are calculated from
the GMT Time and the GMT Offset.
The RMX's current GMT Time settings.
Select the Up or Down cursor to alter the GMT Time
on the RMX.
The time zone difference between Greenwich and
the RMX's physical location.
Select the Up or Down cursor to alter the GMT
Offset time on the RMX.
Click this button to automatically update the RMX's
GMT Date, Time and Offset to match that of the
workstation.
Select this check box to synchronize the time with
up to three NTP servers. When selected, the
manual GMT Date and GMT Time setting options
are disabled. The GMT Offset fields are still active.
To implement this mode an external connection to
an NTP server must be enabled.
Enter the IP addresses of the required NTP servers
in order of precedence.
The Status field indicates whether registration with
the NTP Server failed or succeeded.
Use this button to adjust the start time of all the
reservations in one operation. For more information
see "Adjusting the Start Times of all Reservations"
on page 7-20
19-53