Polycom RMX 1500 Administrator's Manual page 219

6
There are two methods to define the dialing string:
A Using the MCU's IP Address and the Alias string.
B
Using only the Alias string (requires a gatekeeper).
Method A (If no gatekeeper is used):
In the IP Address field, enter the IP address of the MGC hosting the
destination conference (Master conference).
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry
Queue (EQ), the Conference ID and Password of the destination
conference (Master Conference) as follows:
EQ ID##Destination Conference ID##Password (Password
is optional).
F or E xa m p l e : 10 05 # #2 00 0 6# # 12 34
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
In the Alias Name field, enter the MGC Prefix as registered in the
gatekeeper, EQ ID, Destination Conference ID, and Password, as
follows:
MGC Prefix EQ ID##Conference ID##Password (Password is
optional)
F o r E x a m p l e : 92 5 10 05 # #2 0 00 6# # 12 34
MCU Prefix as
registered in the
gatekeeper
Chapter 3-Cascading Conferences
Destination
Conference ID
Cascade-enabled Conference ID
EQ ID
Password (optional)
Password (optional)
3-55