Polycom RMX 1500 Administrator's Manual page 913

Table C-34 Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO
CONFERENCE, OPERATOR ATTEND PARTY TO CONFERENCE
Field
Party ID
Connection Type
Bonding Mode
Number Of
Channels
Net Channel Width
Net Service Name
Restrict
Description
The identification number assigned to the participant by
the MCU.
The connection type, as follows:
0 - Dial-out
5 - Dial-in
Note: This field is only relevant to ISDN/PSTN
participants.
Possible values are:
0 - Bonding is disabled
1 - Bonding is enabled

255 - Auto
Note: This field is only relevant to ISDN/PSTN
participants.
The number of channels, as follows:
255 - Auto
Otherwise, in range of 1 - 30
The bandwidth of each channel.
This value is always 0, which represents a bandwidth of
1B, which is the only bandwidth that is currently
supported.
The name of the Network Service.
An empty field "" indicates the default Network Service.
Indicates whether or not the line is restricted, as follows:
27 - Restricted line
28 - Non restricted line
255 - Unknown or not relevant
Chapter C-CDR Fields - Unformatted File
C-49