Hw Monitor Pane Tool Bar - Polycom RMX 1500 Administrator's Manual

Viewing Hardware RMX 1500 Component's
Properties

HW Monitor Pane Tool bar

The following buttons appear in the tool bar of the Hardware Monitor:
Table 20-2 HW Monitor Pane Tool bar Buttons
Button Name
System Reset
System Shut
Down
System Start Up
Shelf Manager
Logger Mode
The properties displayed for the hardware components will vary
according to the type of component viewed. These component properties
can be grouped as follows:
Chapter 20-RMX Hardware Monitoring
Description
Resets and restarts the system. Resetting saves
settings and information that you changed in the
system, i.e. IP Services, etc...
Safely shuts down the system instead of
unplugging or manually shutting it down.
Starts up the system.
Note: This button is only displayed when
connecting directly to the Shelf Management
server.
Sets the MFA, CPU and Switch (Cards: MPM/
MPM+/MPMx, CNTL and RTM IP) into
diagnostic mode. For more information, see
"Diagnostic Mode (RMX 1500/2000/4000)" on
page 20-30.
Note: This button is only displayed when
connecting directly to the Shelf Management
server.
Diagnostics Tests selection and Tests
monitoring.
Note: This button is only displayed when
connecting directly to the Shelf Management
server.
20-3