Polycom RMX 1500/2000/4000 Getting Started Guide
Enabling a User
Renaming a User
13-6
The Administrator can enable a User that was disabled automatically by
the system (in the Ultra Secure Mode) or manually by the administrator.
To enable a user:
1
In the RMX Management pane, click the Users (
The Users pane is displayed.
2
Right-click the user to be enabled and select Enable User.
A confirmation box is displayed.
3
Click YES.
The User status in the Users list - Disabled column changes to NO.
To rename a user:
1
In the RMX Management pane, click the Users (
The Users pane is displayed.
) button.
) button.