Polycom RMX 1500 Administrator's Manual page 975

Integrating the RMX into the Microsoft Office
Communications Server Environment
Setting the Matched URI Dialing Method
When the RMX is integrated into the Office Communications Server
environment, calls to conferences running on the RMX can be routed
using Matched URI dialing and/or Numerical dialing.
Both routing methods (numerical dialing and Matched URI dialing) can
be enabled simultaneously in the Office Communications Server and the
RMX system or you can enable one of these methods, depending on your
environment requirements.
In both methods, the RMX configuration is the same.
To enable the Matched URI dialing method the following tasks have to be
completed:
Office Communications Server side:
1
Set the Static Route & Trusted Host for RMX in the Office
Communications Server.
2
Optional if Load Balancer Server is present. Set the Static Route &
Trusted Host for RMX in the Load Balancer server.
RMX side:
The following tasks are detailed in "Configuring the RMX 1500/2000/4000
for Microsoft Integration" on page H-80.
3
Modify the Management Network Service to include the DNS server
and set the Transport Type to TLS.
4
Create the security certificate (using one of the two available
methods)
5
Define a SIP Network Service in the RMX and install the TLS
certificate.
6
Modify and add the required system flags in the RMX System
Configuration.
7
Optional. Defining additional Entry Queues and Meeting Rooms in
the RMX environment. For more information see "Defining a New
Entry Queue" on page
page 4-6.
Chapter H-Setting the RMX for Integration Into Microsoft Environment
5-4 and "Creating a New Meeting Room" on
H-7