Polycom RMX 1500 Administrator's Manual page 515

Hide thumbs Also See for RMX 1500:

Table of Contents

Default IP Network Service Icons

Ethernet Settings

The RMX 2000 is set to automatically identify the speed and transmit/

receive mode of each LAN ports located on the RTM LAN or RTM ISDN

cards that are added to the system. These port settings can be manually

configured if the specific switch requires it, via the Ethernet Settings as

for RMX 1500/4000. For more details, see RMX 1500/2000/4000

Administrator's Guide, "Ethernet Settings" on page 14-30.

RMX 1500: The Port numbers displayed in the dialog box do not reflect the

physical Port numbers as labeled on the RMX 1500 MCU.

Signaling Host IP Address and MCU Prefix in GK Indications

The RMX Web Client displays the Signaling Host IP Address and MCU

Prefix in GK parameters as defined in the Default H.323 Network Service.

Video/Voice Port Configuration and Resolution Configuration

These configurations are set for the system and are applied to all the

Network Services.

This Network Service supports both SIP and H.323

connections and is designated as default for H.323

connections.

This Network Service supports both SIP and H.323

connections and is designated as default for SIP

connections.

This Network Service supports only H.323

connections and is set as default for H.323

connections.

This Network Service supports only SIP connections

and is set as default for SIP connections.

Chapter 14-Network Services

Rmx 4000 Rmx 2000