Polycom RMX 1500 Administrator's Manual page 272

Polycom RMX 1500/2000/4000 Getting Started Guide
7-2
Resources
• The maximum number of participants per reservation is determined
by the availability of system resources:
— RMX 1500 MPMx-Q Mode: 90 (25 video).
— RMX 1500 MPMx-S Mode: 180 (45 video).
— RMX 1500 MPMx-D Mode: 360 (90 video)
— RMX 2000 MPM Mode: 400 (80 video).
— RMX 2000 MPM+ Mode: 800 (160 video).
— RMX 2000 MPMx-D Mode: 720 (180 video).
— RMX 4000 MPM+ Mode: 1600 (160 video).
— RMX 4000 MPMx-D Mode: 1440 (180 video).
From Version 7.1, MPM media cards are not supported.
• System resources are calculated according to the RMX's license. For
more information see "Video/Voice Port Configuration" on page 59.
• System resource availability is partially checked when reservations
are created:
— If a conference duration extension request is received from an
ongoing conference, the request is rejected if it would cause a
resource conflict.
— If several reservations are scheduled to be activated at the same
time and there are not enough resources for all participants to be
connected:
• The conferences are activated.
• Participants are connected to all the ongoing conferences
until all system resources are used up.
• If sufficient resources are not available in the system and a scheduled
Reservation cannot be activated, the Reservation is deleted from the
schedule.
• Resources for Reservations are calculated using the Reserve Resources
for Audio/Video Participants fields of the New Reservation dialog box.
For more information see "New Reservation – Reserved Resources" on
page 12.
• Resources are reserved for participants at the highest video
resolution supported by the Line Rate specified in the conference